This checklist is for people putting together a home crypto hardware node and choosing the supporting equipment. Use it to think through the computer, storage, network connection, power backup, switch, and enclosure before you assemble a setup.
Get hardware and tech essentials delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
The sections follow those six equipment slots. Some have a named pick; the UPS and enclosure sections offer selection guidance because no product was specified. Product names can be incomplete, so check the exact listing and device requirements before buying.
Work through the checklist from core components outward: confirm the board and storage fit your intended setup, then check network, power, and physical placement. Treat each pick as a candidate to verify for compatibility rather than a guarantee that it works with every node.
Single-board computer
The single-board computer is the starting point for the node, so confirm that its capabilities match the software and workload you plan to run. The named pick is the CanaKit Raspberry Pi 4 4GB Starter PRO Kit. Its product name identifies a Raspberry Pi 4 and 4GB, but it does not establish which accessories are included or whether the kit meets a particular node’s requirements; check the listing and the software documentation.
A common mistake is treating a starter kit as a complete, ready-to-run node without checking its contents. Review the included power supply, storage, case, cooling, and cables, then compare them with what your setup needs. Also verify that the intended operating system and node software support the board. Confirm physical fit for any add-on boards or enclosure, including clearance around connectors and cooling components.
Plan storage and networking alongside the board instead of assuming every accessory connects directly. Check the board’s available ports and the adapter or drive interface before ordering add-ons. If you already own components, compare their connectors and dimensions with the kit contents. The right choice is the one that satisfies your software, connection, and space requirements together.
What to look for:
- Verify the node software supports Raspberry Pi 4.
- Confirm the kit contents against your power, cooling, and cabling needs.
- Check the available ports for planned storage and network accessories.
- Measure clearance for add-on boards and the intended enclosure.
CanaKit Raspberry Pi 4 4GB Starter PRO Kit

A comprehensive starter kit for Raspberry Pi 4 Model B with 4GB RAM, featuring a pre-loaded 32GB microSD card, high-gloss case with integrated fan mount, low-noise cooling system, 3.5A USB-C power supply, heat sinks, and a 6-foot display cable supporting up to 4K60p. Includes the CanaKit USB-C PiSwitch for power control.
Pros:
- Includes all essential components for Raspberry Pi setup
- High-quality cooling system with low-noise fan
- Supports 4K60p display output
Cons:
- No smart home compatibility
- Does not include a monitor or keyboard
Best for: Builders whose node software supports Raspberry Pi 4
Not ideal for: Setups that need unverified accessories or different board support
Bottom line: Confirm software support, kit contents, and accessory fit before making this the node’s foundation.
NVMe solid-state drive
Storage choice affects how the node’s data is connected and housed, so verify both the drive and its mounting or cooling hardware. The named pick is “NVMe M.2 SSD Heatsink, Aluminum Heat Sink with Thermal Pad for PS5 & P.” That wording describes a heatsink, not a clearly identified SSD model. Do not assume it includes an NVMe drive; check the listing for the exact contents and intended use.
A frequent buying mistake is confusing an M.2 heatsink with the SSD itself. If you still need a drive, choose one separately that meets your node software’s storage requirements. Check the M.2 size, interface, and physical clearance supported by the board or enclosure. The product title mentions PS5, but that alone does not confirm fit with your single-board computer or its mounting hardware.
Before buying, compare the heatsink’s dimensions and mounting method with the intended drive and case. Confirm that the thermal pad contacts the drive as intended and that the assembled parts leave room for nearby components, cables, and airflow. If the node will use a different storage connection, this heatsink may not belong in the setup. Make the drive-to-board fit the deciding check, not the broad product title.
What to look for:
- Confirm whether the listing includes a drive or only a heatsink.
- Match the M.2 size and interface to the board or adapter.
- Check heatsink dimensions and mounting method against the enclosure.
- Verify clearance for cables, nearby components, and airflow.
NVMe M.2 SSD Heatsink, Aluminum Heat Sink with Thermal Pad for PS5 & PC NVMe M.2

This aluminum heatsink is designed for M.2 2280 NVMe SSDs, providing efficient cooling with a double-sided design that reduces temperatures by up to 30°C. Made from durable materials with thermal pads for optimal heat transfer, it ensures stable performance and easy installation.
Pros:
- Effective double-sided cooling reduces SSD temperatures significantly
- Durable aluminum construction with corrosion resistance
- Easy to install with simple screw mechanism
Cons:
- Not compatible with dual-layer hard drives
- Requires screw installation, may be challenging for some users
Best for: Builders who already have a compatible NVMe drive
Not ideal for: Anyone expecting this product title to identify a complete SSD
Bottom line: Confirm the listing contents and physical compatibility before treating this as the node’s storage solution.
USB-to-Ethernet adapter
A wired network connection can be part of a node setup, but this named pick is “USB-C Magnetic Right-Angle Adapter, 240W, 2-Pack.” The title describes a USB-C adapter, not a USB-to-Ethernet adapter. It does not establish that it provides Ethernet or networking functionality. Check the listing carefully before assigning it this slot.
The key buying mistake here is relying on the requested category rather than the actual product details. Confirm that any candidate explicitly provides a USB-to-Ethernet connection, and check that its USB connector matches an available port on the board or a supported hub. A right-angle or magnetic connector, as named here, does not itself indicate an Ethernet port. Also inspect how the connector sits when plugged in: nearby ports, cables, or enclosure walls may limit clearance.
If this product is intended as a separate cable-management or connector accessory, verify its role and fit independently from network connectivity. Check the device requirements for supported adapters and confirm any needed driver or operating-system support. Avoid assuming the “240W” wording indicates a networking feature. For this checklist slot, use a product whose stated function and connectors clearly match wired Ethernet, then confirm it works with the selected board and software.
What to look for:
- Check that the product explicitly provides USB-to-Ethernet functionality.
- Match the USB connector to an available, supported board port.
- Confirm operating-system or driver support for the adapter.
- Check right-angle connector clearance around nearby ports and the enclosure.
USB-C Magnetic Right-Angle Adapter, 240W, 2-Pack

This two-pack of magnetic USB-C adapters supports charging up to 240W and USB 2.0 data transfer up to 480 Mbps. Each adapter rotates 360 degrees and reverses 180 degrees; video output and USB-C hubs are not supported.
Pros:
- Supports charging up to 240W with compatible devices, chargers, and cables
- Rotating right-angle design can help keep the connector out of the way
- Magnetic tip allows quick attachment and removal
- Can serve as a dust cover for the USB-C port
Cons:
- Does not support video output or USB-C hubs
- Data transfer is limited to USB 2.0 speeds and not recommended for large files
- Magnetic tips need protection from metal particles and debris
Best for: A separate USB-C connector accessory, if that is intended
Not ideal for: Anyone shopping specifically for a USB-to-Ethernet adapter
Bottom line: Choose a clearly identified Ethernet adapter for this slot and verify its connection and software support.
Uninterruptible power supply
A UPS is an advice-only slot in this checklist because no product was named. Its purpose in a setup is to provide backup power during an interruption, but the right model depends on the equipment you intend to connect and the behavior you need during an outage. Start by listing the board, storage, network devices, and any other components that should receive backup power.
A common mistake is choosing by outlet count alone. Check the total load and connector types for the devices you plan to protect, and confirm that the UPS supports that load. Consider whether you need enough runtime to shut the node down cleanly or to maintain operation for a defined period; do not assume a particular runtime without checking the manufacturer’s specifications for your load. Also check the device’s dimensions and where it can sit near the setup.
Compatibility includes power plugs, any monitoring connection, and support from the node’s operating system if you want automated shutdown behavior. Review the UPS documentation for those details before purchase. Keep critical components on the backed-up outlets and distinguish them from outlets that may not provide backup. The useful choice is a UPS that meets your load, connection, and runtime needs, with its limits clearly understood.
What to look for:
- Add up the load of the devices that need backup power.
- Match outlets and plugs to the equipment in the setup.
- Check manufacturer runtime guidance at the expected load.
- Verify monitoring and automated-shutdown support if needed.
- Confirm the UPS fits the available placement.
Rack-mount network switch
The switch is the network connection point for wired devices in a larger setup. The named pick is “Ubiquiti UniFi Switch Enterprise 8-Port Gigabit and 2.5G PoE+ Managed.” The product name indicates an eight-port managed switch and mentions Gigabit, 2.5G, and PoE+, but it does not establish that it suits every node or rack. Verify the exact model specifications and your equipment’s needs.
A common mistake is assuming that a rack-mount switch will fit the available rack or that every connected device can use every feature. Confirm the switch’s dimensions and mounting requirements against the rack or shelf. Map the devices, count the ports needed, and check each device’s Ethernet speed and whether it requires PoE. Make sure the switch’s stated PoE capability and available power budget align with the devices you intend to power; do not infer per-port capacity from the name alone.
Also check the network plan and management requirements. A managed switch may offer settings you need to configure, so review how it is administered and whether that fits your network experience. Confirm cable types, port locations, and clearance for power and network cables once installed. Choose this pick only if the port count, speed, power, and mounting all match your setup.
What to look for:
- Confirm the exact model, port count, and supported speeds.
- Check rack, shelf, or mounting dimensions and clearance.
- Match PoE needs and power budget to connected devices.
- Count required ports, including any uplink or management connections.
- Review switch management and network configuration requirements.
Ubiquiti UniFi Switch Enterprise 8-Port Gigabit and 2.5G PoE+ Managed Switch

The Ubiquiti UniFi Switch Enterprise 8-PoE is a managed network switch featuring eight ports with support for both Gigabit and 2.5G speeds. It provides PoE+ power delivery and SFP+ uplinks, housed in a durable metal case suitable for enterprise networking environments.
Pros:
- Supports high-speed 2.5G and Gigabit connections
- Includes PoE+ for powering devices over Ethernet
- Durable metal construction suitable for enterprise use
- Managed switch capabilities for advanced network control
Cons:
- Limited to 8 ports, which may not suit larger networks
- Requires specific UniFi software ecosystem for full management
Best for: Setups that need its verified port and PoE capabilities
Not ideal for: Small setups with no need for managed switching or rack placement
Bottom line: Confirm dimensions, ports, speed, and PoE capacity against the actual network plan.
Ventilated equipment enclosure
An enclosure helps organize and protect the equipment physically, and ventilation should be considered alongside dimensions and access. This is an advice-only slot because no product was specified. Start by measuring the board, storage hardware, switch, power equipment, and cable bends you want housed. Decide whether these components belong in one enclosure or in separate locations based on their size and connection needs.
A common mistake is choosing a case that fits the board but leaves no room for connectors, airflow, or later access. Measure the full assembled components, including heatsinks and attached cables. Check that the enclosure has openings where the chosen board and accessories need them, and that ventilation is not blocked by a wall, shelf, or nearby equipment. Do not assume a ventilated design will cool every configuration adequately; follow component guidance and allow for the actual arrangement.
Check how the enclosure opens and how you will reach storage, ports, and power connections for maintenance. Confirm mounting options, material, and cable-entry locations suit the intended placement. If the network switch or UPS is included, ensure their dimensions and ventilation needs are supported too; a board enclosure may not accommodate larger equipment. Select an enclosure around the complete assembled setup, not just its smallest component.
What to look for:
- Measure all components, heatsinks, and cable clearance.
- Check port access and cable-entry locations.
- Ensure vents remain unobstructed in the planned placement.
- Verify mounting and access for maintenance.
- Confirm the enclosure fits the switch or UPS if they will share it.
Use a budget-first buying order by covering required core parts before optional organization upgrades: confirm the board and actual storage drive, then resolve wired networking and backup power, and finish with the switch or enclosure only if your layout calls for them. Check each product listing and the device documentation before checkout so an accessory is not mistaken for a complete component.
You can make this setup manageable by verifying one connection and one physical fit at a time. Keep a short list of what you own, what each pick actually includes, and what remains to confirm. With those checks in hand, you can build a clear, compatible shopping list and adjust it to your node’s needs.
